Skip to content
📦 Kostenloser Versand ab 150 CHF und Bänfer Matten (exkl. Kletterwände & Sperrgut)
📦 Kostenloser Versand ab 150 CHF und Bänfer Matten (exkl. Kletterwände & Sperrgut)

fortifications

Alles was du benötigst um Deine Klettergriffe sicher an der Wand zu befestigen.

  • 12 mm concrete drill !! professional quality !!

    CHF 14.50 - CHF 14.50
    CHF 14.50
    CHF 14.50 - CHF 14.50
    CHF 14.50
    In stock

    Hammer drill with SDS-PLUS shank, fits in all commercially available percussion drills and percussion hammers with SDS holder the chisel-shaped ...

    View full details
    CHF 14.50 - CHF 14.50
    CHF 14.50
    CHF 14.50 - CHF 14.50
    CHF 14.50

  • Knot hole drill 12mm

    CHF 37.00 - CHF 37.00
    CHF 37.00
    CHF 37.00 - CHF 37.00
    CHF 37.00
    In stock

    Alloyed tool steel, centering point with cutting geometry, two main cutting edges with offset grooves and the toothed circumferential cutting edge...

    View full details
    CHF 37.00 - CHF 37.00
    CHF 37.00
    CHF 37.00 - CHF 37.00
    CHF 37.00

  • Drive-in anchor M 10

    CHF 1.00 - CHF 47.00
    CHF 1.00 - CHF 47.00
    CHF 1.00 - CHF 47.00
    CHF 1.00
    2+ in stock

    Drive-in anchor M10 The best solution for a climbing wall where the climbing holds are to be attached directly to the concrete wall Drilling dep...

    View full details
    CHF 1.00 - CHF 47.00
    CHF 1.00 - CHF 47.00
    CHF 1.00 - CHF 47.00
    CHF 1.00

  • Drive-in nut special M10 EXPERT STAINLESS STEEL

    CHF 1.15 - CHF 104.00
    CHF 1.15 - CHF 104.00
    CHF 1.15 - CHF 104.00
    CHF 1.15

    Are you planning an outdoor climbing wall that should also withstand professional use? Then you should equip your hole pattern with the special st...

    View full details
    CHF 1.15 - CHF 104.00
    CHF 1.15 - CHF 104.00
    CHF 1.15 - CHF 104.00
    CHF 1.15

  • Drive-in nut Galvanized M 10 for climbing holds climbing wall - bouldering wall

    CHF 3.10 - CHF 260.00
    CHF 3.10 - CHF 260.00
    CHF 3.10 - CHF 260.00
    CHF 3.10

    Drive-in nut Galvanized M10 Drive-in nuts are required for mounting climbing holds on a wooden wall. The drive-in nuts act as a counterpart ...

    View full details
    CHF 3.10 - CHF 260.00
    CHF 3.10 - CHF 260.00
    CHF 3.10 - CHF 260.00
    CHF 3.10

  • Drive-in nuts M10 stainless steel (stainless)

    CHF 0.90 - CHF 800.00
    CHF 0.90 - CHF 800.00
    CHF 0.90 - CHF 800.00
    CHF 0.90

    1 drive-in nuts STAINLESS STEEL M10 x 13 mm Packing unit: 1 piece Drive-in nuts are required for mounting climbing holds on a wooden wal...

    View full details
    CHF 0.90 - CHF 800.00
    CHF 0.90 - CHF 800.00
    CHF 0.90 - CHF 800.00
    CHF 0.90

  • Screw-in nut M 10 for wooden walls

    CHF 6.75 - CHF 1,220.00
    CHF 6.75 - CHF 1,220.00
    CHF 6.75 - CHF 1,220.00
    CHF 6.75
    In stock

    1 screw-in nut galvanized M10 Screw-in nuts are required for mounting climbing holds on a wooden wall. The screw-in nuts act as a counterpart to...

    View full details
    CHF 6.75 - CHF 1,220.00
    CHF 6.75 - CHF 1,220.00
    CHF 6.75 - CHF 1,220.00
    CHF 6.75
  • Innengewindehülse mit bauaufsichtlicher Zulassung

    Internally threaded sleeve with building authority approval

    CHF 3.95 - CHF 3.95
    CHF 3.95
    CHF 3.95 - CHF 3.95
    CHF 3.95
    2+ in stock

    Internally threaded sleeve M 10 x 80 mm Internally threaded sleeve has building authority approval. The internally threaded sleeve has an outer d...

    View full details
    CHF 3.95 - CHF 3.95
    CHF 3.95
    CHF 3.95 - CHF 3.95
    CHF 3.95

  • Hex key "Professional 2.0" size 6 for climbing holds

    CHF 14.95 - CHF 14.95
    CHF 14.95
    CHF 14.95 - CHF 14.95
    CHF 14.95
    In stock

    Allen key "Professional 2.0" size 6 Head size: 6 (suitable for countersunk screws DIN 7991 size M 10) Total length: 22 cm including 16 cm hexago...

    View full details
    CHF 14.95 - CHF 14.95
    CHF 14.95
    CHF 14.95 - CHF 14.95
    CHF 14.95

  • Hex key professional 2.0 size 8 for climbing holds

    CHF 14.95 - CHF 14.95
    CHF 14.95
    CHF 14.95 - CHF 14.95
    CHF 14.95
    2+ in stock

    This completely redesigned hex wrench Professional 2.0 specifically addresses the needs of climbing. With the small hexagonal profile on the plast...

    View full details
    CHF 14.95 - CHF 14.95
    CHF 14.95
    CHF 14.95 - CHF 14.95
    CHF 14.95

  • Countersunk screw stainless steel M10 30 mm

    CHF 1.10 - CHF 98.00
    CHF 1.10 - CHF 98.00
    CHF 1.10 - CHF 98.00
    CHF 1.10

    Countersunk screw stainless steel M10 length 30 mm A2 stainless steel, countersunk head, with SW socket drive, without shank. DIN ~7991, ISO 106...

    View full details
    CHF 1.10 - CHF 98.00
    CHF 1.10 - CHF 98.00
    CHF 1.10 - CHF 98.00
    CHF 1.10

  • Countersunk screw stainless steel M10 30 mm

    CHF 1.10 - CHF 49.50
    CHF 1.10 - CHF 49.50
    CHF 1.10 - CHF 49.50
    CHF 1.10
    In stock

    Countersunk screw stainless steel M10 length 30 mm A2 stainless steel, countersunk head, with SW socket drive, without shank. DIN ~7991, ISO 106...

    View full details
    CHF 1.10 - CHF 49.50
    CHF 1.10 - CHF 49.50
    CHF 1.10 - CHF 49.50
    CHF 1.10

  • Countersunk screw stainless steel M10 40 mm

    CHF 1.20 - CHF 54.00
    CHF 1.20 - CHF 54.00
    CHF 1.20 - CHF 54.00
    CHF 1.20
    In stock

    Countersunk screw stainless steel M10 length 40 mm A2 stainless steel, countersunk head, with SW socket drive, without shank. DIN ~7991, ISO 1064...

    View full details
    CHF 1.20 - CHF 54.00
    CHF 1.20 - CHF 54.00
    CHF 1.20 - CHF 54.00
    CHF 1.20

  • Countersunk screw stainless steel M10 50 mm

    CHF 1.30 - CHF 58.50
    CHF 1.30 - CHF 58.50
    CHF 1.30 - CHF 58.50
    CHF 1.30
    In stock

    Countersunk screw stainless steel M10 length 50 mm A2 stainless steel, countersunk head, with SW socket drive, without shank. DIN ~7991, ISO 106...

    View full details
    CHF 1.30 - CHF 58.50
    CHF 1.30 - CHF 58.50
    CHF 1.30 - CHF 58.50
    CHF 1.30

  • Countersunk screw stainless steel M10 60 mm

    CHF 1.40 - CHF 63.00
    CHF 1.40 - CHF 63.00
    CHF 1.40 - CHF 63.00
    CHF 1.40
    In stock

    Countersunk screw stainless steel M10 length 60 mm A2 stainless steel, countersunk head, with SW socket drive, without shank. DIN ~7991, ISO 1064...

    View full details
    CHF 1.40 - CHF 63.00
    CHF 1.40 - CHF 63.00
    CHF 1.40 - CHF 63.00
    CHF 1.40

  • Countersunk screw stainless steel M10 70 mm

    CHF 1.50 - CHF 68.00
    CHF 1.50 - CHF 68.00
    CHF 1.50 - CHF 68.00
    CHF 1.50
    In stock

    Countersunk screw stainless steel M10 length 70 mm A2 stainless steel, countersunk head, with SW socket drive, without shank. DIN ~7991, ISO 1064...

    View full details
    CHF 1.50 - CHF 68.00
    CHF 1.50 - CHF 68.00
    CHF 1.50 - CHF 68.00
    CHF 1.50

  • Countersunk screw Zinc plated M10 40 mm

    CHF 0.75 - CHF 47.50
    CHF 0.75 - CHF 47.50
    CHF 0.75 - CHF 47.50
    CHF 0.75

    Countersunk screw M 10 galvanized, length 40 mm Blue galvanized steel, countersunk head, with SW socket drive, strength class 10.9, without sha...

    View full details
    CHF 0.75 - CHF 47.50
    CHF 0.75 - CHF 47.50
    CHF 0.75 - CHF 47.50
    CHF 0.75

  • Setting tool for M 10 drive-in dowel

    CHF 24.50 - CHF 24.50
    CHF 24.50
    CHF 24.50 - CHF 24.50
    CHF 24.50
    2+ in stock

    Application: The setting tool is required to anchor the drop-in anchor in the drill hole. How a drop-in anchor works: After inserting it into th...

    View full details
    CHF 24.50 - CHF 24.50
    CHF 24.50
    CHF 24.50 - CHF 24.50
    CHF 24.50

  • Perforated sleeve for hollow block masonry or perforated bricks

    CHF 2.30 - CHF 2.30
    CHF 2.30
    CHF 2.30 - CHF 2.30
    CHF 2.30
    2+ in stock

    Area of ​​application: If climbing holds are attached to masonry, the following must be distinguished: Is it a hollow block masonry/perforated bri...

    View full details
    CHF 2.30 - CHF 2.30
    CHF 2.30
    CHF 2.30 - CHF 2.30
    CHF 2.30

  • Special drive-in nut M10 "PROFESSIONAL" galvanized

    CHF 9.95 - CHF 679.95
    CHF 9.95 - CHF 679.95
    CHF 9.95 - CHF 679.95
    CHF 9.95

    1 special drive-in nut "PROFESSIONAL" Flange nuts M10 M10 fastening with chipboard screws Drive-in nuts are required for mounting climbing hol...

    View full details
    CHF 9.95 - CHF 679.95
    CHF 9.95 - CHF 679.95
    CHF 9.95 - CHF 679.95
    CHF 9.95

  • Cylinder head screw stainless steel M10 80mm

    CHF 1.20 - CHF 77.50
    CHF 1.20 - CHF 77.50
    CHF 1.20 - CHF 77.50
    CHF 1.20

    Cylinder head screw M10 stainless steel Length: 80mm Packing unit: 1 piece Not with continuous thread

    CHF 1.20 - CHF 77.50
    CHF 1.20 - CHF 77.50
    CHF 1.20 - CHF 77.50
    CHF 1.20

  • Cylinder head screw M10 zinc plated 120mm

    CHF 0.55 - CHF 90.00
    CHF 0.55 - CHF 90.00
    CHF 0.55 - CHF 90.00
    CHF 0.55

    Cylinder head screw M 10 galvanized Length: 120mm Packing unit: 1 piece metal screws Blue galvanized steel, cylinder head, with...

    View full details
    CHF 0.55 - CHF 90.00
    CHF 0.55 - CHF 90.00
    CHF 0.55 - CHF 90.00
    CHF 0.55